Replacement hard disk

A hard drive, like all computer components, can somehow fail and then need to be replaced. And there can be many reasons for that. The hard disk belongs to the category of "iron" that needs to be replaced most often. This is connected with the need to expand the amount of memory for data storage, and with various malfunctions and breakdowns. Almost any repair there boils down to a simple replacement of a failed HDD. But in reality, everything is much more complicated than it seems at first glance. Do you notice that your laptop makes a suspicious creaking sound while working? Does the operating system take a long time to load? Need more time to download apps? These are signs that the hard drive has begun to "fall". Unfortunately, this happens even with the most reliable models of laptops: one of the factors of this is the lifespan of the hard drive. The user encounters the connection of a hard disk quite often, compared to, for example, a flash drive, more information is stored on it, and it works much faster than a DVD-ROM drive. When connecting an additional disk, first of all, it should be taken into account that the jumpers on it (more precisely, their position) should not coincide with the connected devices, in particular with the DVD-ROM drive or with the new hard disk. Most often, it is preferable to connect an additional hard disk via a SATA cable, rather than via an IDE cable. This will allow you to avoid problems with the installation of jumpers.

The service includes:

• заміна жорстого диску на ноутбуці
• заміна жорсткого диску на ПК
• часткове розбирання комп’ютера
• dismantling the "old" (if necessary), installation and connection of the "new» HDD
• тестування працездатності комп’ютера з новим HDD

Before starting work, it is necessary to allow some time for the computer to cool down and the hard drive to reach room temperature. The hard drive inside the system unit is usually located in the front part directly under the disk drive. It is easy to detect by the red loops that connect to it. When disconnecting the cables and loops, there may be difficulties, as some efforts must be made, but there is nothing dangerous in this. The main thing is to make sure that the hand does not jump off and hit other boards. Then you should immediately unscrew the small bolts in the side part. After that, the device can be easily pulled out of the socket - the hard drive is pushed out on a kind of sled.

When installing a new device, it is important to avoid distortions. As soon as it is in its place, the bolts are tightened, and the power supply and the data cable are connected. After that, you can turn on the computer and check its performance, then the assembly of the computer and the installation of the hard disk is finished.

Computer HDD failed? Experts KOmP Systems you replace it with a new hard drive.

When you need to change the hard drive:

• якщо бажаний обсяг інформації не поміщається на «старому» HDD
• If the HDD is not detected or is incorrectly Due malfunction head / "sectors" hard wild

When replacing the hard disk recommend cause:

• настройку BIOS для виставлення правильного порядку завантаження пристроїв
• форматування HDD і подальшу установку системи

We will not claim that we have the lowest prices. You can buy cheaper on e-bay or through online stores, but you risk buying a defective HDD or a hard disk that is not suitable for you, and the delivery time can be extended to several weeks, and you are effectively deprived of the warranty. We regularly monitor the prices of other SCs, so our price is one of the lowest.

Note: "New" hard drive in the cost of services not included. This shop new hard drive it is recommended to coordinate the selection of the master